Common problem

Release time：2018-01-22

Common problem：

How does the A. learning code operate?

The code: long press on the indoor machine set button for 5 seconds, the issue of "Mi Rui Duo" voice prompts, enter the code model, then let go, select the outdoor machine transmitter, press the button, the indoor machine sounded the currently selected tone and stored in the current configuration mode, the complete code and automatically exit code state; PS: the code configuration for 30s, no operation will automatically exit, you can choose to configure the 30s during the music and sound size; and one can only match a transmitter;

The maximum support for 16 sets of transmitter pairing combinations; one tow combination up and down can choose to switch freely, without the need to enter the code mode to select the ringtone;

Clear code: long press on the indoor machine set button for 10 seconds, 5 seconds will be issued when the "Duo Mi Rui" tone, keep pressing state to 10 seconds, a "Mi Rui Duo" tone, said Qing code has been completed, the outdoor machine transmitter pair will all failure, to no allocation the state of the indoor machine recovery;

B. why doesn't the radio doorbell ring?

1. check whether the receiver has a good power supply or load the battery, indicating whether the light will flicker or not.

2. check whether the transmitter takes out the battery insulation

3. check whether it is a mute mode, or the light mode is not bright, please debug the volume key or set the key.

4. check whether the transmitter and receiver are not matched, and the learning mode can be rematched.

C. Installation attention:

1. non professionals with high voltage circuits and precision electronic components do not open their own maintenance without authorization.

2. do not install on the metal surface and near, avoid metal objects to affect the signal transmission and acceptance of the doorbell;

3., please try to use the high quality alkaline battery, avoid using ordinary battery with short battery life and easy to infiltrate the electrolyte. The distance of use is obviously shortened or missed. Replace the battery.

4., when the launcher is installed, the shell is not completely fastened. Do not try to press the button to avoid improper operation or excessive force, damage the button and shell.

5. please avoid long time rainwater soaking and sunshine insolation.

6. please use this product correctly according to the instructions, which can effectively prolong the service life of the product.