Current location：home > Footer content > User guide
admin@make-top.com 0755-23012980
admin@make-top.com 0755-23012980
Current location：home > Footer content > User guide
Times of browsing：814second Release time：2018-01-08
Installation instructions
Product installation instructions：
Wireless signal products are easily affected by metal, walls, dirt, barriers, etc. (such as no signal or weak signal in a cell phone in an elevator or a closed iron roof).
The product can reach 300M in the open and free environment test. It usually passes through the anti-theft door, and the wall can reach 25-150 meters (depending on the specific environment).
1.Before using the product, the simulation position is tested first, and then the double sided adhesive or screw is used to fix the emitter after the remote control.
2.The launcher is not installed on the metal door and the burglar door or door frame, and if the distance is very short, replace the position of the launcher.
3.The receiver is far away from the television, the refrigerator, the air conditioner, the routers, the electromagnetic furnace, the horn and other places with magnetic or signal interference.
4.The nearer the distance between the transmitter and the receiver, the nearer the wall or the less the obstacles, the farther the signal is.
MAKETOP ELECTRONIC LIMITED
National service hotline 400-000-000
08:00 - 20:00
address：No. 2001 ,Gebu commercial building ,Songgang, Baoan District, Shenzhen ,China
Telephone：0755-23012980
